Dental LED Curing Lamp 1 Second Cure Blue Light Metal Head Dentistry Tool

Dental LED Curing Lamp 1 Second Cure Blue Light Metal Head Dentistry Tool

Technical specifications:

1. Dimensions: 25mm×25mm×240mm

2. Net weight: 280g

3. Power source

4. Power supply: rechargeable Lithium battery

5. Battery mode: ICR 18490

6. Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit.

7. AdapterPower Input: 100V to 240V, 50Hz/60 HzInput Power: 10VAPower Output: DC5V/1A ​

Light source:

​1.5W high power blue light LED

2. Checking method: the LED light is fine when the light is on during operating correctly.

3.The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentsply etc.

4. Wave length: 440nm-480nm

1.5 Light intensity:

P1 mode 1200-1800mW/cm2

P2 mode 1200mW/cm2~1600mW/cm2

P3 mode 1200mW/cm2~1600mW/cm2

Operation:

1. Press the mode button. Following two modes are available. ​2. TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about1800mW/cm2

3. NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds. Its output light intensity is about 1600 mW/cm2

4. During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to "0".

5. During operation, the blue light can be stopped by press the power button at any time. ​6. After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.

7. Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time. ​8. When the battery needs to be charged, connect the plug of the adapter into the AC100V~240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging.

9. After operating, take off the disposable sleeve and throw away, forbidden to reuse.

10. This equipment will turn off automatically if don't any action within 2 minutes, turn it on bypress any button.

11. The depth of solidification of composite is no less than 2mm per 1 second.

Material:The handle is made of plastic,The lamp holder is made of metal

Company Introduction

MINNO MEDICAL INSTRUMENT CO., Ltd is a professional dental manufacturer of dental
equipment and fttings research and development.Our main products include high and low speed
dental handpieces, Endo files, Endodontic treatment, Implant system, apex locator, Obturation
system, teeth whitening, Led curing light, Air scaler, dental lamp and dental spare parts, etc.
Fashionable style and reasonable price, we have rich experience in dental handpiece and memory
files manufacturing, can customize products for customers. If you need anything, please contact me.
We will try our best to satisfy you. Because " Customer satisfaction is our greatest pursuit and
goal."We have a team of experienced R&D engineers and skiled staffs, so we are able to supply you
the products in high quality at competitive price, and on time delivery. We sincerely hope
all customers in the world to be our partners.

FAQ:

1. Can I have a sample order?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
2. How can I get the after-service?
We have online aftersale-service 24 hours, If you have any questions, just contact us by email, we will solve the problem quickly.
3. Do you have inspection?
100% self-inspection before packing and also 100% force test.
4. Do you offer guarantee for the products?
Yes, we offer 6 Months warranty to our products.
5. What 's your advantage? Why we choose you?
We specialized in this field for over 10years, we focused on the high quality dental handpiece, dental equipment.Besides, we provide good after-sale service. And compared with the same kind of products, we have a competitive price. We can offer you 365days, 24hours online service.

Dental LED Curing Lamp 1 Second Cure Blue Light Metal Head Dentistry Tool Images